Standard Series Sunshades are silver reflective on the outside and white on the inside.
Black/Silver Series Sunshades are silver reflective on the outside and black on the inside. If the windshield is symmetrical, the sunshade can be reversed in the winter with the black side out to retain the heat. Please note: Black Series side window sunshades cannot be reversed.
Gold Series Sunshades are gold reflective on the outside and black on the inside and add a little “bling” to the windshield. If the windshield is symmetrical, the sunshade can be reversed in the winter with the black side out to retain the heat. Please note: Gold Series side window sunshades cannot be reversed.
SIDE, REAR & SKYLIGHT SUNSHADES
Side, Rear and most skylight sunshades attach with suction cups
All Heatshield model sunshades are MADE IN THE USA!! The Windshield Reflector HeatShield is an automotive windshield reflector, "sun shade," or "sun visor," custom designed to fit the shape of each car model's windshield. The HeatShield material is simple and unique. A special metallized polyester film, laminated to a thin layer of closed-cell foam, with a clear polyester film back. HeatShields are custom cut using the latest in computer-aided cutting technology. Then they are sewn around the edge with a cloth binding. So HeatShields are reflective, insulating and custom fit for every car. INSTALLATION: HeatShield installation is easy and quick. Lay the Heat Shield across the dash. Lift up to the windshield. Drop the sunvisors for support. The HeatShield is stiff enough to be supported by the sunvisors alone, but it is flexible enough to be bent around the mirror. Once installed, HeatShield will reduce the interior temperature at the dashboard by as much as 40 deg. F. (25 deg. C.) HeatShields are simple to use, but they are just as easy to store! PRODUCT STORAGE: When not in use, store your HeatShield like this: Lift sunvisors and pull HeatShield down. Roll up from end to end. Wrap the attached Velcro strap
INFORMATION ON REARVIEW MIRROR SENSORS:
- Q: What do you mean by "with rearview mirror sensor" and "without rearview mirror sensor"?
- A: Many of today's newer vehicles are equipped with safety sensors located around the rearview mirror. When a Heatshield's description says "w/ sensor" it means that there is an additional cutout for a sensor.
HOW TO INSTALL HeatShield
HeatShields are all custom-made and fit for every make and model vehicle. Every HeatShield will fit differently as there are differences in rearview mirror mount locations, side windshield frame (A-pillar) designs, Headliners, and dash designs, as well as windshield shapes and sizes. We pattern the HeatShields directly off of the windshields of the new cars and trucks so we can take into account these unique differences into our product design.
STEP 1: Unroll HeatShield across dash. Make sure HeatShield is centered in windshield and placed as far down where glass meets dash.
STEP 2: Tuck HeatShield behind rearview mirror, if mounted on windshield. It is okay to bend HeatShield.
STEP 3: Lift HeatShield against glass. Adjust HeatShield in windshield, may overlap slightly with side windshield frame (A-pillars) and headliner.
STEP 4: Lower sunvisors for support.
- Product Storage
When not in use, store your HeatShield like this: Lift sunvisors and pull HeatSheild down. Roll up from end to end. Wrap the attached Velcro strap
- Return Information
RETURNS: Heatshields are returnable within 30 days of purchase. There is NO re-stocking charge and the Heatshield sunshade must be in original box in resellable condition.
The customer will pay for return shipping charges.
Call or Email for a Return Authorization Number. Include a packing slip with the Return Authorization Number and Name of the purchaser inside of the box. Please write the Return Authorization Number on the outside of shipping box.
The Orginal Shipping is Non-Refundable.
All returned Sunshades without a Return Authorization Number on the box will be refused.
Ship Returns to:
6410 W MONTEREY PL
CHANDLER, AZ 85226